Friday, March 19, 2010

 
Login
Plastex Wheels
Series P - Cap. to 5,000 lbs.


















OPTIONAL ACCESSORIES
  • Wheel Bearing Seals.
  • Special Hub Length
          - hubs can be cut to provide
         shorter length, spacer washings
         furnished to increase length.
  • Spanner Bushings
    		•  Fiber-filled phenolic resin, molded under extreme pressure, gives Hamilton Plastex wheels the ability to carry heavy loads without damaging floors in intermittent service. They are non-marking, resist corrosion from oil, water, grease and commonly used acids or solvents, and will not spark. They can be operated continuously in temperatures ranging from -50° to 260° F and intermittently to 300° F.

    Roller bearings are standard in all wheels (choice of straight or precision tapered roller bearings in most of the larger sizes). Tapered bearing wheels feature superior -anti-slip- installation: bearing cups are press-fit into the counterbored ends. All wheel sizes 5" and above (except 6" x 2-1/2", 6" x 3" and 8" x 3") have ball-check pressure lubrication fittings.     		Hi-Heat Plastex wheels, designed to withstand temperatures up to 475° F are shown in the chart below.

    NOTE: Because of their special high heat properties these wheels are more brittle than the standard compound, and not well suited for use over rough surfaces.

    Laminated Plastex treads are newly featured and shown in the last chart below. Laminated treads are made from continuous phenolic impregnated fiber laminations that are wound over standard macerated centers. The end result is a much greater resistance to fraying, with up to 35% more impact strength and 25% more capacity.

    ______________________________________________

    FEATURED WHEEL BEARINGS

    Straight Roller Bearings: traditional anti-friction bearing, best for manual applications where shock loading (but no side thrust) is prevalent.

    Tapered Roller Bearings: best for most severe heavy duty and power-towed applications
    To order or see more detail, click on desired bore or bearing size.

    = available for 24 Hour PRONTO® shipment
    View
    Printer Friendly
    PDF Version
    P Series Selection Table
    Dimensions in inches
    Dia.FaceHub
    Length    		Cap.
    Lbs.    		Plain BoreStraight Roller BearingsTapered Roller BearingsWt.
    Lbs.
    Model
    Number    		Bore
    Sizes    		Model
    Number    		Bearing
    Sizes    		Model
    Number    		Bearing
    Sizes
    31 3/41 7/8550W-310-PL-13/16W-310-P-3/8XX1
    3 1/41 1/21 5/8600W-315-PL-1 3/16W-315-P-1/2 - 5/8 - 3/4XX1
    22 3/16700W-320-PL-1 3/16W-320-P-1/2 - 5/8 - 3/4XX2
    41 1/21 5/8600W-415-PL-1 3/16W-415-P-1/2 - 5/8 - 3/4XX2
    22 3/16800W-420-PL-1 3/16W-420-P-1/2 - 5/8 - 3/4XX2
    51 1/21 5/8600W-515-PL-1 3/16W-515-P-1/2 - 5/8 - 3/4XX2
    22 3/161000W-520-PL-1 3/16 - 1 7/16W-520-P-1/2 - 5/8 - 3/4 - 7/8 - 1XX2
    61 1/21 5/8800W-615-PL-1 3/16W-615-P-1/2 - 5/8 - 3/4XX2
    22 3/161200W-620-PL-1 3/16 - 1 7/16W-620-P-1/2 - 5/8 - 3/4 - 7/8 - 1XX3
    2 1/23 1/41800W-625-PL-1 15/16W-625-P-1 - 1 1/4W-625-PT-3/4 - 16
    33 1/42000W-630-PL-1 15/16W-630-P-1 - 1 1/4W-630-PT-3/4 - 16
    822 3/161400W-820-PL-1 3/16 - 1 7/16W-820-P-1/2 - 5/8 - 3/4 - 7/8 - 1XX5
    2 1/23 1/42000W-825-PL-1 15/16W-825-P-1 - 1 1/4W-825-PT-3/4 - 18
    33 1/43000W-830-PL-1 15/16W-830-P-1 - 1 1/4W-830-PT-3/4 - 110
    102 1/23 1/42500W-1025-PL-1 15/16W-1025-P-1 - 1 1/4W-1025-PT-3/4 - 19
    33 1/42900W-1030-PL-1 15/16W-1030-P-1 - 1 1/4W-1030-PT-3/4 - 112
    122 1/23 1/43000W-1225-PL-1 15/16W-1225-P-1 - 1 1/4W-1225-PT-3/4 - 112 1/4
    33 1/43500W-1230-PL-1 15/16W-1230-P-1 - 1 1/4W-1230-PT-3/4 - 115
    3 1/24 1/44000W-1235-PL-2 7/16W-1235-P-1 1/4 - 1 1/2XX20
    1634 1/44000W-1630-PL-2 3/16 - 2 7/16W-1630-P-1 - 1 1/4 - 1 1/2XX28
    45 1/45000W-1640-PL-2 7/16W-1640-P-1 1/4 - 1 1/2XX39

    HI-HEAT PLASTEX WHEELS
    Dimensions in inches
    Dia.FaceHub
    Length    		Cap.
    Lbs.    		Plain BoreStraight Roller BearingsTapered Roller BearingsWt.
    Lbs.
    Model
    Number    		Bore
    Sizes    		Model
    Number    		Bearing
    Sizes    		Model
    Number    		Bearing
    Sizes
    41 1/41 3/8250W-412-HHPL-1/2W-412-HHP-1/2 - 5/8XX1
    22 3/16500W-420-HHPL-1 3/16W-420-HHP-1/2 - 5/8 - 3/4XX2
    51 1/41 3/8300W-512-HHPL-1/2W-512-HHP-1/2 - 5/8XX2
    22 3/16750W-520-HHPL-1 3/16W-520-HHP-1/2 - 5/8 - 3/4XX3
    622 3/16900W-620-HHPL-1 3/16W-620-HHP-1/2 - 5/8 - 3/4XX4
    822 3/161100W-820-HHPL-1 3/16W-820-HHP-1/2 - 5/8 - 3/4XX5
    1033 1/42400W-1030-HHPL-1 15/16W-1030-HHP-1 - 1 1/4W-1030-HHPT-3/4 - 115
    1233 1/42600W-1230-HHPL-1 15/16W-1230-HHP-1 - 1 1/4W-1230-HHPT-3/4 - 113

    LAMINATED PLASTEX WHEELS
    Dimensions in inches
    Dia.FaceHub
    Length    		Cap.
    Lbs.    		Plain BoreStraight Roller BearingsTapered Roller BearingsWt.
    Lbs.
    Model
    Number    		Bore
    Sizes    		Model
    Number    		Bearing
    Sizes    		Model
    Number    		Bearing
    Sizes
    622 3/161500W-620-LPL-1 3/16 - 1 7/16W-620-LP-1/2 - 5/8 - 3/4XX3
    822 3/161750W-820-LPL-1 3/16 - 1 7/16W-820-LP-1/2 - 5/8 - 3/4XX5
    1033 1/43600W-1030-LPL-1 15/16W-1030-LP-1 - 1 1/4W-1030-LPT-3/4 - 112
    1233 1/44400W-1230-LPL-1 15/16W-1230-LP-1 - 1 1/4W-1230-LPT-3/4 - 115

    footerlogo.gif
    Terms and Conditions
    Copyright © 2009 Hamilton Caster & Mfg. Co.